CYCLE SETTING BUTTONS
To Install the Drying Rack
With the dryer door open, slide the rack into
1
the dryer drum.
2
Make sure it is seated evenly on the edge
of the inner door rim and resting flat on the
inside of the dryer.
NOTE: Be sure to remove the drying rack
after using the RACK DRY cycle.
SPECIAL FUNCTIONS
The option buttons also activate special
functions, including CHILD LOCK, DRUM LIGHT,
ENERGY UASGE DISPLAY and LANGUAGE.
Press and hold the option button marked with the
special function for 3 seconds to activate.
*
DRUM LIGHT
Use DRUM LIGHT with item you can
see the drum inside by choosing drum
light function. It helps easy viewing
the drying cycle. Press and hold the
EASY IRON button for 3 seconds to activate or
deactivate the DRUM LIGHT function.
34
(cont.)
*
CHILD LOCk
being changed while the dryer
is operating. Press and hold the RACK DRY
button for 3 seconds to activate or deactivate the
CHILD LOCK function.
The child lock indicator will be shown in the display,
and all buttons are disabled except the ON/OFF
button.
NOTE: CHILD LOCK lasts after the end of cycle.
If you want to deactivate this function,
press and hold the RACK DRY button
for 3 seconds.
*
ENERGY USAGE DISPLAY
Energy Star's rate. This is a default option. To
turn off this option, press and hold the WRINKLE
CARE button for 3 seconds. (Estimated operating
cost based on a 2007 national average electricity
cost of 10.65 cents per kWh and natural gas cost
of $1.218 per therm.)
NOTE: Your cost will depend on your utility rates
and use. And the electric energy and operating
cost display the default of a cycle.
*
LANGUAGE
the display changes. Then select the desired
language by pressing the DAMP DRY BEEP
button.
Once set, the selected language will remain
in memory, even if the Dryer is turned off or
unplugged.
Use this option to prevent
unwanted use of the dryer
or to keep cycle settings from
This option provides the electric
energy and operating cost for the
cycle you selected on the LCD display.
The electric charge is converted at
You may change the language shown
in the display from English to French
or Spanish. Press and hold the DAMP
DRY BEEP button for 3 seconds until