Assembling - SEVERIN 7118 Manual De Instrucciones

Assembling

– Only assemble appliance parts when the plug has been disconnected from the mains socket.
3 Assembling
Fit the hose and the telescopic tube Zillustrated quick start guide (page 1).
–
– Only use undamaged nozzles. Damaged nozzles can scratch surfaces.
– Select the appropriate nozzle for the surface being vacuum-cleaned:
1
2
1
2
The switchable floor nozzle has 2 settings:
– Position 1 is excellently suited to cleaning dirt and fibres from
carpets, rugs etc. and for deep cleaning of these surfaces.
– Position 2 is ideal for all kinds of smooth hard floors.
The hard floor nozzle is excellently suited for cleaning hard floors
with crevices and joints. In order to clean crevices and joints most
effectively, the nozzle must rest completely on the surface. To
clean coarse soiling, it may be helpfully to angle the nozzle slightly.
The upholstery nozzle is excellently suited for upholstered furni-
ture, upholstery and mattresses. Caution: to prevent the upholstery
nozzle from becoming stuck to the surface, we recommend that
you open the bypass vent on the handle a little (more if required).
The turbo brush is ideal for cleaning animal hairs and straightening
the carpet pile. Caution: only clean non-delicate surfaces with the
turbo nozzle. Otherwise there is a risk of damage. The speed of the
rotating brush roller can be adjusted with the slider:
– Position 1 for carpets with a low pile
– Position 2 for carpets with a high pile
The furniture brush is excellently suited for gently cleaning furni-
ture, skirting boards and similar items.
The crevice nozzle is perfectly suited for cracks in sofas and other
spaces which are hard to reach.
15