General Safety Rules; Work Area Safety; Electrical Safety; Personal Safety - Makita JS1660 Manual De Instrucciones

Ocultar thumbs Ver también para JS1660:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
SPECIFICATIONS
Max. cutting capacities
Min. cutting radius
Strokes per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.

GENERAL SAFETY RULES

WARNING:
Read all instructions. Failure to follow all
instructions listed below may result in elec-
tric shock, fire and/or serious injury. The
term "power tool" in all of the warnings listed
below
refers
to
(corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS

Work area safety

1.
Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.

Electrical safety

4.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
Model
Steel up to 400 N/mm
Steel up to 600 N/mm
Steel up to 800 N/mm
Aluminum up to 200 N/mm
Overall length
Net weight
your
mains-operated
2
1.6 mm (16 ga.)
2
1.2 mm (18 ga.)
2
0.8 mm (22 ga.)
2
2.5 mm (13 ga.)
4,500 /min.
304 mm (12")
1.3 kg (2.9 lbs)
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
GEA001-3
6.
Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
7.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.

Personal safety

9.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
10. Use safety equipment. Always wear eye protec-
tion. Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal inju-
ries.
11. Avoid accidental starting. Ensure the switch is in
the off-position before plugging in. Carrying
power tools with your finger on the switch or plug-
ging in power tools that have the switch on invites
accidents.
12. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
2
JS1660
---
JS1670
1.0 mm (20 ga.)
0.7 mm (23 ga.)
0.5 mm (26 ga.)
2.5 mm (13 ga.)
30 mm (1-1/8")
4,500 /min.
306 mm (12")
1.3 kg (2.9 lbs)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Js1670

Tabla de contenido