Warranty; Declaration Of Conformity - VITO PRO-POWER VICOC300A Manual De Instrucciones

EN
The compressor starts regularly due to
tank's pressure drop, without any tool
connected or deficit in the distributing
system:
• Air leak through the connections;

10. WARRANTY

The warranty of this product is two years from the date
of purchase. You should, therefore, keep your proof of
purchase during this period of time. The warranty covers
any manufacturing defect in material or operating, as
well as parts and work needed for their recovery.
Excluded from the warranty the misuse of the product,
any repairs carried out by unauthorized persons (outside
the service center of the brand VITO) as well as any
damage caused by the use of it.
• Charge the compressor until it reaches its maximum
pressure and then shut it down;
If the air leaks are imperceptible, throw water with soap in
every connection.
The air leaks will be revealed through the air bubbles
formation.
Tighten the connections where the air bubbles appear.
If it persists, consult technical assistance;

11. DECLARATION OF CONFORMITY

We declare under our exclusive responsibility, that the
product Meets the following standards or standardisation
documents: EN ISO 12100:2010, EN 1012-1:2010, EN
60204-1:2006+A1:2009+AC:2010, EN 61000-
6-1:2007, EN 61000-6-3:2007+A1:2011+AC:2012,
EN 61000-3-2:2014, EN 61000-3-3:2013, EN
62321:2009, EN 50581:2012, according to the
determinations of the directives:
2014/30/EU – Electromagnetic compatibility directive;
2014/35/EU - Low Voltage;
2006/42/EC - Machinery directive;
2011/65/EU - Directiva RoHS;
2000/14/CE
- Sound power level mesured: LpA: 73,7 dB(A);
- Sound power level guaranteed: LwA: 83 dB(A).
S. João de Ver, 9 August 2018
th
Central Lobão S. A.
Responsible for the Technical File
18
41