Kohler K-3322 Guia De Instalacion página 4

Wax Seal
Bottom of Bowl
T-Bolt
2. Install the New Toilet
CAUTION: Risk of external leakage. Do not lift or rock the
bowl after placement. If you break the watertight seal, you must
install a new wax seal.
CAUTION: Risk of product damage. Overtightening may cause
breakage or chipping of vitreous china.
Install or relocate the supply and outlet as necessary to conform
to the roughing-in dimensions.
Install a supply shut-off valve.
Record the model number in the Homeowners Guide.
Lay the toilet down onto a padded surface.
From the bottom of the toilet, firmly press a new wax seal around
the toilet outlet.
Remove the temporary rag (if used) from the toilet flange hole.
Align and lower the toilet over the flange and T-bolts.
Apply your full body weight around the toilet to set the seal.
Place the plastic bolt cap bases over the T-bolts in the "up"
position as marked.
Place the metal washers and nuts on the plastic bolt cap bases
and T-bolts.
Carefully tighten the nuts.
1021795-2-D
Bolt Cap
Bolt Cap Base
T-Bolt
Closet Flange
4
Nut
Washer
Kohler Co.