Publicidad
Enlaces rápidos
SUPPLIED MATERIAL
1
Self-threading screws / Tornillos autoroscantes / Blechschrauben
Allen key / Llave allen / Inbusschlüssel
2
3
Lighting fixture / Estructura luminaria / Leuchten-Struktur
TECHNICAL SPECIFICATIONS
Stage
Design by X. Claramunt & M. de Mas
ASSEMBLY INSTRUCTIONS
INSTRUCCIONES DE MONTAJE
MONTAGEANLEITUNG
MATERIAL SUMINISTRADO
ESPECIFICACIONES TÉCNICAS
GELIEFERTES MATERIAL
1.
2.
8962
3 un.
2 un.
1 un.
TECHNISCHE DATEN
3.
Publicidad
Resumen de contenidos para VIBIA Stage
- Página 1 Stage Design by X. Claramunt & M. de Mas ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE MONTAJE MONTAGEANLEITUNG SUPPLIED MATERIAL MATERIAL SUMINISTRADO GELIEFERTES MATERIAL 8962 3 un. Self-threading screws / Tornillos autoroscantes / Blechschrauben 2 un. Allen key / Llave allen / Inbusschlüssel 1 un.
- Página 2 ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE MONTAJE MONTAGEANLEITUNG IMPORTANT NOTICE: Switch of the mains before installing the lamp. 1. Remove the three screws (A) to disassemble the cylinder (B). Use one of the supplied allen keys. 2. Loosen with the other allen key without removing the screws (C) to extract the metallic plates (D) by sliding them through the slits of the cylinder (B).
- Página 3 ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE MONTAJE MONTAGEANLEITUNG 4. Fill in and screed the area as shown in the picture, covering the head of the screws and possible imperfections. 5. Connect to the mains. Your installation must be prepared to be connected to the 12V terminal strip. 6.
- Página 4 ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE MONTAJE MONTAGEANLEITUNG 7. Connect and place the bulb. 8. The whole assembly can rotate and the lower tube can be orientated as shown by the arrows. 7. Conectar y montar la bombilla. 8. Todo el conjunto puede efectuar un movimiento de rotación y el tubo inferior tiene la posibilidad de giro en la dirección que indican las flechas.