User Maintenance - Andis LCS-1 Instrucciones De Uso Y Cuidado

ALCI SHOCK PROTECTION
This Andis hair dryer has been manufactured
with an appliance leakage circuit interrupter
(ALCI) (Figure A). This mechanism will shut
the dryer off (making it inoperable) under
abnormal conditions, such as falling or
being immersed in water. The ALCI shock
protection is equipped with a test and a
reset button. Following are instructions on
their use.
TEST BEFORE EACH USE
1. Plug the ALCI shock protection plug into a 110-120 volt electrical outlet
(ordinary household current). Do not attempt to use any other electrical
outlet.
2. Before attempting to switch the dryer on, perform the following test:
Press the test button; the reset button should pop up. This confirms that
the safety plug is working properly.
3. Now press the reset button and your dryer will be operable and the
power switch of your dryer may be turned on for normal use.
4. If the dryer does not operate properly, it should be either returned to an
Andis authorized service station for examination, or discarded.
TURNING DRYER ON
To turn dryer ON, move switch to LOW or HI position. To turn dryer OFF,
move switch to OFF position (Figure B).
BLOWER SPEEDS
There are two blower speeds - HI
or LOW. Fingertip control allows
you to quickly turn dryer ON and
select desired speed (Figure B).
COOL SHOT
This dryer is equipped with a cool
shot button. To achieve the cool
shot of air, press the cool shot
button (Figure B). The cool shot is
ideal for locking in curl for longer
lasting style. Just concentrate cool
air on desired curl until set.
4
A
B C
COOL
SHOT
GRILL
HI
LOW
OFF
BACK OF DRYER

USER MAINTENANCE

RESET
This appliance does not require special maintenance, cleaning or
TEST
lubrication. Service only through Andis authorized service stations. To find
an Andis authorized service station near you log on to www.andis.com
or contact our customer service department: 1-800-558-9441 (U.S.) or
1-800-335-4093 (Canada).
Untwist cord before use. After use, re-wrap cord and store unit in a safe
place. Do not wrap cord tightly around appliance. Do not hang the unit by
the power cord.
TO REMOVE AIR INTAKE GRILL
This Andis dryer is equipped with a removable air intake grill. This grill may
be removed for ease of cleaning excess hair and lint that can clog up a hair
dryer. To remove the grill, simply turn grill counter-clockwise (Figure C). To
clean grill that has been removed from the dryer, take a small brush and
mild cleaning solution and lightly brush away excess lint and hair. Rinse and
dry. Be sure that grill is completely dry before placing it back on to the
dryer. Once grill is completely dry, place grill back onto dryer, turn
clockwise, and it will snap back into place.
CLEANING
• The hair dryer must be unplugged before it is cleaned.
• Clean the external surfaces of the hair dryer with sponge or soft rag
moistened with a mild soap and water solution. Do not use harsh cleaners,
detergents, or solvents.
• Dry the hair dryer thoroughly before use.
• Clean screen with vacuum cleaner.
5