dirna Bergstrom Bycool COMPACT 3.0 Instrucciones De Montaje página 20

COMPACT 3.0
EN ES
To place the front (at the previous mentioned)
11
spigots with (1) washer M6 wide wing and
(1) nut M6 in each spigot. To tight nuts til the
rubber ducting til run into the upper rubber of
the unit.
IMPORTANT: The rubber ducting must
being run into the upper rubber of the unit
to avoid air leaks
11
EPDM
Gasket
Cabin roof
Upholstey
Tighten nut mentioned under point 10a until it
12
touches upper surface of front.
12
EPDM
Gasket
Cabin roof
Upholstey
Place console and centre equipment in the
13
most convenient place of cabin roof. Once
centred, remove console for later installation.
Unit base
Nut M6
Stud M6
Unit base
Nut M6 (10a)
Nut M6
Stud M6
Rubber ductings
Rubber ductings
20
Air conditioning for vehicles
Foam Gasket
front with louvers
Foam Gasket
front with louvers