Cleaning The Device - Urmet 1096/201 Manual De Usuario

This menu is used to vary the image viewing mode. Select this item to access the following submenu:
CONTRAST
SHARPNESS
COLOR GAIN
DNR
TRANSFER MODE
FORMAT
DWDR
RETURN
CONTRAST
Point to this parameter to edit the contrast value. Levels which can be set from 1 to 50
SHARPNESS
This is used to vary image definition by setting values from 1 to 20.
COLOR GAIN
Point to the parameter to edit the colour gain value. Levels which can be set from 1 to 31
DNR (NOISE REDUCTION)
This function (Dynamic Noise Reduction) is used to reduce 2D digital image noise visible particularly in
absence of light. Levels which can be set from 1 to 15
TRANSFER MODE
The camera can use four different video outputs, on the same BNC connector:
•
High definition video output 1080P AHD (Analog High Definition)
•
CVBS standard interlaced video output
•
Video output in TVI or CVI mode. Not for use with products of the Urmet range
FORMAT
Video standard selection: PAL or NTSC
D-WDR (DIGITAL WIDE DYNAMIC RANGE)
The function D-WDR is the digital version of WDR (Wide Dynamic Range). This allows a better
balance of brightness of light and dark areas to obtain a more detailed image
Select ON to activate the function

CLEANING THE DEVICE

•
Rub delicately with a dry cloth to remove dust and dirt.
•
Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.
•
Do not use volatile liquids (such as petrol, alcohol, solvents, etc.) or chemically treated clothes to
clean the device to prevent deformation, deterioration or scratches to the paint finish.
DS1096-005A
VIDEO SETTING
VIDEO SETTING
13
8
10
6
AHD
PAL
OFF
.
15