Página 1
Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: For easy installation of your Peerless faucet you will need: ® • To READ ALL the instructions completely before beginning.
Página 2
SHUT OFF WATER SUPPLIES. Install Pop-Up Assembly Apply silicone to underside of flange (1). Insert body (2) into sink. Screw flange Remove stopper (1) and flange (2). Remove old faucet. Place gasket (1) on bottom of new onto body. Pivot hole (3) must face back of Screw nut (3) all the way down.
Página 3
FLUSH SYSTEM/CHECK FOR LEAKS. CONNECT TO WATER SUPPLIES. Remove aerator (1) and turn faucet handles (2) all the way on. Turn on hot (HOOK-UPS NOT PROVIDED). and cold water supplies (3) and flush water lines for one minute. Determine which type of connection you will be making.
Página 4
Maintenance When replacing a part, follow the illustrated instructions provided SHUT OFF WATER SUPPLIES on the back of the Repair Part Kit. If faucet exhibits very low flow: If faucet still exhibits very low flow: A. Remove and clean Aerator (3) (page 5), or Replace Stem Unit Assembly (1) and Seats and Springs (2)*, Repair Kit B.
Página 5
RP100635▲ Handle Kits Conjunto de manija Montage de la manette RP100637▲ Lift Rod Barra de Alzar Tige de Manoeuvre RP20547 Retention Screws Note: These screws must be installed into the hole in the top of the stem unit assemblies (1) when using handles mounted from the sides.
Página 6
Any labor charges incurred by the purchaser to repair, replace, install or remove this product are UCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, not covered by this warranty. Peerless Faucet Company shall not be liable for any damage to the BREACH OF CONTRACT, TORT, OR OTHERWISE. PEERLESS FAUCET COMPANY SHALL...