Led Indicators; Connectors And Buttons - Axis P3365–V Guia De Instalacion

AXIS P3365–V Fixed Dome Network Camera

LED Indicators

LED Color
Net- Green
work
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go
to Setup > System Options > Ports & Devices > LED. See the online help for more
information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System
Options > Maintenance .

Connectors and Buttons

For specifications and operating conditions, see page 13.
Network Connector
RJ45 Ethernet connector. Supports Power over Ethernet (PoE).
NOTICE
NOTICE NOTICE
Due to local regulations or the environmental and electrical conditions in which the product
is to be used, a shielded network cable (STP) may be appropriate or required. All cables
connecting the product to the network and that are routed outdoors or in demanding
electrical environments shall be intended for their specific use. Make sure that the network
devices are installed in accordance with the manufacturer's instructions. For information
about regulatory requirements, see Electromagnetic Compatibility (EMC), on page 2 .
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network
activity.
Steady for connection to a 10 Mbit/s network. Flashes for network
activity.
No network connection.
Steady green for normal operation.
Steady during startup and when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
11