Configuring The Channel Menu - Proline L1930HD LED Manual De Instrucciones

Menu Operation
from Stereo, Dual I, Dual II, Mixed.

Configuring the Channel Menu

• Tuner Type
Before your TV can begin
memorising the available channels,
you must specify the type of signal
source that is connected to the TV
(antenna or cable). If the set signal
type is wrong, it is possible that no
channel can be found.
• Auto Scan
Press the ENTER button to enter
sub-menu.
Tuner Type is Antenna:
Country: Press the ◄/► button to select the correct country.
Mode: Press the ◄/► button to select Mode: DTV+ATV, DTV, ATV.
Start: Press the ENTER button to start the auto search.
Tuner Type is Cable:
Country: Press the ◄/► button to select the correct country.
Mode: Press the ◄/► button to select Mode: DTV+ATV, DTV, ATV.
Scan Type: Press the ◄/► button to select Scan Type: Advanced, Quick, Full.
Network ID: Press the ◄/► button to select Network ID: Auto or enter digital
numbers.
Frequency: Press the ◄/► button to select Frequency: Auto or enter digital numbers.
Symbol Rate: Press the ◄/► button to select Symbol Rate: Auto or enter digital
numbers.
Start: Press the ENTER button to start the auto search.
• Manual Scan
Press the ENTER button to enter sub-menu.
- Digital Manual Scan: Press the▲/▼ button to select the Digital Manual Scan, then
press the ENTER button to enter sub-menu.
Tuner Type is Antenna:
Digital Scan: Press the◄/► button to select the channel number.
Start: Press the ENTER button to start the channel search.
Frequency: Display the frequency of current TV signal.
Strength: Display the quality of current TV signal.
Tuner Type is Cable:
Network ID: Press the ◄/► button to select Network ID: Auto or enter digital
numbers.
Frequency: Enter a user-defined frequency.
22