Identification Of Risk Areas; Residual Risks - Manusa Visio Serie Manual De Instrucciones

DUSI01EN - v6
4 SAFETY
The VISIO operator has multiple auxiliary safety functions:
- Fire alarm connection: the door opens even if it is closed and without power supply.
- Opening movement protection:
· The operator is prepared to manage the presence detector signal in the opening area.
· An intermittent acoustic warning is activated if a pedestrian interrupts the opening path on the sliding leaves.
· If the door is opening, it slows down.
For further information regarding the safety of your door, please refer to the specific door safety manual.

4.1 IDENTIFICATION OF RISK AREAS

4.2 SAFETY MEASURES THAT MUST BE TAKEN BY THE USER
1.- Keep the door area tidy and clean.
2.- Do not use any part of the door as a support for objects or persons.

4.3 RESIDUAL RISKS

The primary purpose of the manusa door design is to reduce possible risks, first by eliminating the dangers and then by reduc-
ing risks. This has been done in the following order:
- Intrinsic prevention and safe design.
- Protective measures for risks that can not be eliminated by intrinsic prevention.
- Informative measures about residual risks that can not be sufficiently protected.
- Supplementary measures and precautions.
After this design process, the door presents a residual risk that has not been completely eliminated:
Risk: Impact in the opening area.
Measures to reduce the risk:
- Install the door according to the safety measures indicated in the installation manual.
- Install guards in the opening area that impede access of persons to the danger area.
The sliding leaves of automatic door are heavy moving parts that
present possible hazards that should be known.
A
OPENING AREA
C
CLOSING AREA
O
OPERATOR AREA
E
DOOR AREA
21