allen+roth 1227VA-60-201-903 Manual De Instrucciones página 7

INSTALLATION INSTRUCTIONS
Note: Clean area where the vanity (A) will be
permanently located prior to beginning installation,
ensuring the vanity (A) will not interfere with any
water supply and drain lines once mounted.
Note: Use preassembled levelers on legs of
vanity (A) to level the item. Twisting the
levelers counterclockwise will increase the
height of vanity (A), twisting them clockwise
will decrease it.
6. With two people, carefully place vanity (A)
against the wall in its final location.
From inside vanity (A), drill hole through vanity
mounting area and into wall studs. Using
mounting hardware (not included) appropriate
for your installation site, secure vanity (A) to
wall stud. If possible, secure vanity (A) to
two wall studs for increased stability.
WARNING
Vanity (A) MUST be secured to wall.
Note: A t this stage it may be easier to install
the faucet and drain kit (not included) to top (D)
per the manufacturer's instructions, before
moving on to Step 7.
7. Apply stain free silicone caulk (not included) to
the top edge of vanity (A). With the help of
another adult, gently lower top (D) onto the
vanity (A). Wipe away any excess caulk with a
soft cloth, and wait approximately 24 hours for
it to dry.
6
1
A
7
2
A
7
2
1
D
2