Samsung 4900 Serie Manual Del Usuario página 16

Ocultar thumbs Ver también para 4900 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Issues
No Picture, No Video
The TV will not turn on.
The TV turns off automatically.
You can not play 3D videos in some
of the BD players.
There is no picture/video
Antenna(Air / Cable) Connection
The TV is not receiving all channels.
No Caption on digital channels.
The picture is distorted: macroblock,
error, small block, dots, pixelization.
Network Connection
The wireless network connection
failed.
Others
Purple/green rolling horizontal bars
and buzzing noise from the TV
speakers with Component cable
connection.
The picture will not display in full
screen.
Plasma TV is making humming
noise.
[PF4900-ZL]BN68-04838B-03L02.indb 16
Solutions and Explanations
• Make sure the AC power cord is securely plugged into the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the
POWER
button on the TV to make sure the problem is not the remote control. If the TV
turns on, refer to 'Remote control does not work' below.
• Ensure the Sleep Timer is set to Off in the System menu.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is
no signal.
• Take out the disk from player and put it again, or restart the BD player.
• Check cable connections. (remove and reconnect all cables connected to the TV and external devices).
• Set your external device's (Cable/Set top box, DVD, Blu-ray etc) video outputs to match the connections to
the TV input. For example, if an external device's output is HDMI, it should be connected to an HDMI input
on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV's correct source by pressing the
• Reboot the connected device by reconnecting the device's power cable.
• Make sure the coaxial cable is connected securely.
• Please try Auto Program or Auto Tuning to add available channels to the channel list.
• Verify the Antenna is positioned correctly.
• Check Caption setup menu.
• Some channels may not have caption data.
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as
sports and action movies.
• A low signal can cause picture distortion. This is not a TV problem.
• Samsung Wireless LAN adapter is required to use a wireless network.
• Make sure the TV is connected to a wireless IP sharer (Router).
• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that
the set-top-box has a grounding issue. Replace the Component video cables with an HDMI connection.
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
• Black bars on Top & Bottom will be shown on movies that have aspect ratios different from your TV.
• Adjust picture size option on your external device or TV to full screen.
• Plasma TVs typically make a soft humming sound. This is normal. It's caused by the electrical charges that
are used to create the images on the screen.
• If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the
brightness lower.
• You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface.
Also try rerouting your connection cables.
• Improper installation of wall mount can create excessive noise.
English - 16
SOURCE
button on the remote control.
2013-08-05
5:03:31

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pl43f4900Pl51f4900

Tabla de contenido