Progressive Airflow; Full Power Operation - Sharp AY-XP18GR Manual De Instrucciones

PROGRESSIVE AIRFLOW

Press the PROGRESSIVE AIRFLOW button during cooling or dry operation when you do
not want to feel cold air. Vertical adjustment louvre is set obliquely upward to deliver
cool air to the ceiling.
Press the button during heating operation. Vertical adjustment louvre is set downward
to deliver the warm air down to the floor and warm you.
AM
DISPLAY

FULL POWER OPERATION

In this operation, the air conditioner works at maximum power to makes the room
cool or warm so rapidly that you can use it just after you come home.
AM
DISPLAY
NOTE:
• You can not set the temperature or fan speed during the FULL POWER operation.
1
During operation, press the PROGRESSIVE
AIRFLOW button.
• The remote control will display
TO CANCEL
Press the PROGRESSIVE AIRFLOW button.
NOTES:
• The PROGRESSIVE AIRFLOW setting is cancelled when
1
you press FULL POWER button while PROGRESSIVE
AIRFLOW is set.
• If you want PROGRESSIVE AIRFLOW operation in FULL
POWER mode, press PROGRESSIVE AIRFLOW button
during FULL POWER operation.
1
To activate the FULL POWER operation, press the
FULL POWER button during operation.
• The remote control will display
• The temperature display will go off.
• The green FULL POWER lamp (
light up.
TO CANCEL
Press the FULL POWER button again.
• FULL POWER operation will also be cancelled when
the operation mode is changed, or when the unit is
turned off.
1
• The green FULL POWER lamp (
turn off.
E-11
.
.
) on the unit will
) on the unit will