Caller-Id Function (Clip) - Premier TEL-4244IL Manual De Instrucciones

Press and hold the <# / LOCK> key. Appears on the display and the keypad is locked.
Press and hold the <# / LOCK> key again to un-lock the keypad.
When there is an incoming call, you can still answer the call by pressing the <TALK> key.
During the call, the keypad functions as normal. When the call is ended, the keypad will be
locked again.
4.12 Setting the Dialing Mode
There are two types of dialing mode: DTMF (Tone) and Pulse dialing.
Press and hold <LEFT/FLASH> key for 3 seconds
The display will show: [T] or [P]
The flash time setting will disappear after 2 seconds from the display

4. Caller-ID Function (CLIP)

The phone displays the telephone numbers of incoming calls. This function is only possible if you
are subscribed to a telephone operator that provides this service. Contact your telephone provider
for more information. When you receive a call, the numbers are saved in a call list. This list can
hold 10 telephone numbers (each of max. 23 digits). If the number is longer than 12 digits, you can
press the <CID/"> key to show the other digits.
5.1 New Calls
When you're received a new unanswered call, the CLIP symbol [ ] will blink on the display.
5.2 Consulting the Call List
Press the <CID/"> key. The last received call is shown on the display.
If the list is empty, [NO] is shown on the display.
The following will be shown on the display:
Press <PHBK> key to view the date and time of the Caller ID
You can delete the Call List by pressing the <DELETE> key.
NOTE: Only when the network sends the time/date together with the telephone number!
On some networks with Caller ID, time and date will not be displayed.
6