Register/De-Register A Handset - Premier TEL-4244IL Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Press <PHBK> key.
2. Press the numeric keys to view the corresponding Phonebook memory location.
3. Press <TALK> key to dial the number.
While you are viewing the record that you wish to edit,
1. Press and hold <PHBK> key. The display on the below is shown.
2. Press <DELETE> key to erase the digits, or press and hold <DELETE> key to erase the entire
digits.
3. Press <PHBK> key again to confirm the change.

5. Register/De-register a Handset

6.1 Register to a DECT Base
You can subscribe 5 handsets to 1 base unit. By default, each handset is subscribed as handset 1
on the base unit upon delivery (base unit 1).
You only need to subscribe the handset if:
! The handset subscription has been removed from the base unit (e.g., for re-initialization).
! You want to subscribe a different handset to this base unit.
Reset the base power and the base will be in registration mode for 1 minute.
During this minute, you must do the following to subscribe the handset:
Press and hold <CID/"> key for 3 seconds until both the battery and antenna icons flash, then
press and hold the < * > key for 3 seconds.
The following will appear on the display.
Enter the number of the base unit you would like to scribe the handset to (1 to 4).
The unit will start searching for the base and when found it will ask to enter the PIN code (4 digits).
Enter the base PIN code (0000). If the PIN is wrong, the handset will restart the searching for the
8

Publicidad

Tabla de contenido
loading

Tabla de contenido