Audiovox Rampage ACD-70 Manual Del Usuario página 14

CD CHA A A A A NGER CONTR CD CH CD CH NGER CONTR NGER CONTR NGER CONTROL OL OL OL OLS S S S S
CD CH CD CH NGER CONTR
Built into this radio are controls to operate
an optional CD changer. Please check with
your Rampage/Audiovox car stereo
specialist or call 1-800-645-4994 for
recommendations of the models that will
work with this radio.
Adjustment of the audio functions (volume,
tone, balance, and fader) for the CD changer
operate in the same manner as they do for
radio play. The following controls will operate
the CD changer when it is installed and
connected to this radio. Refer to the owner's
manual included with the CD changer for
instructions on the installation and correct
loading and use of the CD magazine.
dp
CD CHANGER MODE SELECTOR
(MOD)
During radio or CD play, press this button to
select operation of the CD changer as shown
by CDC on the display panel. Disc play will
begin and the disc and track number will be
shown on the display panel. If a new
magazine has been loaded into the changer,
play will begin from the first track of the first
disc in the magazine. If a magazine was
already in the changer, play will resume from
the track on the disc previously in play.
dq
DISC SELECT (CD+ & CD-)
These buttons are used to select the desired
disc for play. To advance to a higher number
disc, press the CD+ button
a lower number disc, press the CD - button.
The number of the disc in play will be shown
on the display panel.
dr
13 13 13 13 13
TRACK SELECT (+
The Track Select functions are used to
quickly access the beginning of a particular
track. Each time the Forward Track Select
(+
higher track number will be selected as
shown on the display panel. Similarly, each
time the Backward Track Select (
of the button is pressed, the next lower track
number will be selected as shown on the
display panel.
ds
CUE/REVIEW FUNCTIONS ( +
High-speed audible search to any section of
the disc can be made by the Cue and Review
functions. Press and hold the Cue (+
side of the button to advance rapidly in the
forward direction or the Review (
of the button to advance rapidly in the
backward direction.
dt
TRACK/DISC SCAN SELECTOR
(SCN)
When the Scan button is pressed, the SCN
indication will appear on the display panel,
and the first 10 seconds of each track on
the disc will be played in order. When a
desired track is reached, press the Scan
button twice with a one second interval
between presses and play of the selected
track will continue (SCN will disappear from
the display panel). The Track Scan mode
will also be canceled by activating another
disc function (Top, Repeat or Random Play).
When the Scan button is pressed twice
cr
the DISC
. To return to
on the display panel and the first 10 seconds
of each track on each disc in the magazine
will be played in order. When a desired disc
track is reached, press the Scan button
/ - )
again and play of the selected disc will
continue uninterrupted (
disappear from the display panel). The Disc
) side of the button is pressed, the next
- )
and SCN indications will appear
DISC
-) side
/
)
-) side
and SCN will