Making Cappuccinos; Making Lattes; Making Iced Cappuccinos - Mr Coffee BVMC-MF Serie Manual Del Usuario

Cycle Min Mark Max Mark
Cappuccino 3 ounces 5 ounces
Iced 3 ounces 5 ounces
Cappuccino
Latte 3 ounces 10
ounces
Warm Milk 3 ounces 10
ounces
*Depending on the type of milk used the output may vary. Note: All kinds
of milk can be used with this Milk Frother. It is recommended to use 2%
milk for optimal frothing results.
4. Plug the electric cord into an electric outlet. All lights will
light on and then off. LED light will light on
Cappuccino cycle as default.
5. Place the frothing cup on the power base
and select your prefer cycle. (Figure 3)
6. Mr. Coffee Milk Frother is now ready to use.
Enjoy it!
Note: The unit will be in standby mode for 30
minutes and then it will turn off automatically.
All LEDs go OFF. The unit can be activated anytime by
pressing either button.
SELECT YOUR PREFERRED CYCLE
You can create an array of delicious milk based drinks with
the Mr. Coffee Automatic Milk Frother.

MAKING CAPPUCCINOS

After setting up the appliance and adding
fresh cold milk follow these steps:
Mark Output
about 8
ounces*
about 8
ounces*
about 12
ounces*
about 12
ounces*
Figure 3
Figure 4
-8-
1. LED lights should be light on Cappuccino cycle as default.
Note: If lights are not on this cycle, press "SELECT" until
LED lights are on Cappuccino cycle. (Figure 4)
2. Then press the On/Off button ( ) to start the selected
cycle.
3. When cycle is completed the ON/OFF LED will go OFF and
the selected function LED will stay ON.
4. Your milk is frothed and ready to create creamy and
delicious cappuccino s.
5. Remove frothing cup from power base, pour and enjoy!

MAKING LATTES

After setting up the appliance and adding fresh cold milk
follow these steps:
1. Press SELECT until LED light is on Latte cycle.
(Figure 4)
2. Then press the On/Off button ( ) to start
the selected cycle. (Figure 5)
3. When cycle is completed the ON/OFF LED
will go OFF and the selected function LED will
stay ON.
4. Your milk is ready to use to create creamy and delicious
lattes!
5. Remove frothing cup from power base, pour and enjoy!
This cycle can also be used for making delicious and creamy
Hot Cocoa!

MAKING ICED CAPPUCCINOS

After setting up the appliance and adding fresh cold milk
follow these steps:
1. Press "SELECT" until LED light is on Iced Cappuccino
cycle. (Figure 4)
2. Then press the On/Off button ( ) to start the selected
cycle. (Figure 5)
3. When cycle is completed the ON/OFF LED will go OFF
and the selected function LED will stay ON.
Figure 5
-9-