Control Panel; Remote Control - Pur Line CHE-610 Manual De Usuario

OPERATION

CONTROL PANEL

2 4
3 5
1
1. Main switch
2. Display
3. Function Indicators
4. Flame
5. Timer
6. Power
7. Heat
Main switch
The main switch is located on the back of the unit.
NOTE: Before using the fireplace please make sure set the main switch to the position I.
Set the main switch to the position O to turn off the unit.
Control Panel
The control panel is located on the top right corner of the unit.
Power ON / OFF
Press the power button to turn on the unit. Press again to turn off the unit.
NOTE: There is a thermostat limiter inside the unit. When the inner temperature is too hot, the unit will
automatically turn off to avoid damage to the product or risk of fire.
CAUTION! WARNING: DO NOT unplug the unit when it is still "ON"
The function indicator has three square LEDs. The red LED indicates that the Fahrenheit temperature heating
function is on, the green LED indicates that the Celsius temperature heating function is on, and the blue LED
indicates that the timer function is engaged.
Flame
Press the flame button to rotate and set flame effect levels.
Button Press
1st Press
2nd Press
3rd Press
4th Press
NOTE: When the heater is turned on, the flame effect level can only rotate and set between High, Medium,
and Low.
EN
6
7
Flame Level Display Value
High L3
Medium L2
Low L1
OFF None

REMOTE CONTROL

1
2
3
4
Fireplace Appearance
Highest flame, logs glow
Medium flame, logs glow
Low flame, logs glow
OFF
11
5
6
7
1. Power
2. Timer
3. Flame
4. Heat
5. Week timer
6 - 7. Week timer
adjustment + -