Imetec Bellissima Zero Pro Dual Instrucciones De Uso página 20

EN
cautioN! remove any communication material such as
labels, tags etc. from the appliance before use.
WarNiNG! risk of suffocation.
children shall not play with the packaging. Keep the plastic
bag out of reach of children.
• this appliance must be used only for the purpose for which it
was designed, namely as an epilator for home use. any other use
is considered not compliant with the intended use and therefore
dangerous.
• Before connecting the appliance to the mains supply, make sure that the
voltage and frequency indicated on the technical data of the appliance
correspond to those of the mains supply. these technical data are present
on the appliance or on the power supply unit, if any (see illustrative guide).
• this appliance can work automatically at a frequency of 50 Hz or
60 Hz.
• the appliance is only to be used with the power supply unit provided.
• this appliance can be used by persons aged from 16 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision or
34
instruction concerning use of the appliance in a safe way and understand
the hazards involved. children shall not use the appliance. children shall
not play with the appliance. cleaning and user maintenance shall not be
made by children.
• Do Not use the appliance with wet hands, damp feet or barefoot.
• Do Not pull the supply cord or the appliance itself to remove the
plug from the socket.
• Do Not pull or lift the appliance by the supply cord.
• Do Not expose the appliance to humidity or atmosferic agents
(rain, sun, etc.) or extreme temperatures.
• the appliance must not be left unattended while it is connected to the
mains supply.
• always disconnect the appliance from the mains supply before
cleaning or performing maintenance and when the appliance is not
in use.
• if the appliance is faulty or malfunctions, switch it off and do not
tamper with it. contact an authorised technical service centre for any
repairs.
• if the supply cord is damaged it must be replaced by an authorised
technical service centre, so as to prevent all risks.
EN
35