Imetec Bellissima Zero Pro Dual Instrucciones De Uso página 23

EN
• any other problem or condition which in your physician's opinion
would make treatment unsafe for you.
WarNiNG! the appliance may be less effective in
removing hair from women with hormonal disorders
since they might cause excessive hair growth,
hirsutism or increased hair growth on the face and
neck. if in doubt, consult your doctor.
tHE colour oF Your sKiN
The appliance removes unwanted hair and selectively affects the hair pigment.
Various amounts of pigment (melanin) are also found in the surrounding skin tissue.
The amount of pigment in the skin, which affects the skin tone, determines the risk
posed to the skin when any type of pulsed light epilation is used.
WarNiNG! Before using the appliance, compare your
complexion with the skin tone range provided in this
manual and/or on the package of the product the
appliance.
NaturallY DarK sKiN
WarNiNG! Do Not use the appliance on naturally
dark or tanned skin.
40
Using the appliance on dark skin can cause adverse effects such as burns,
blisters and changes in the colour of the skin (hyper or hypo-pigmentation).
sKiN colour sENsor
The appliance has a skin colour sensor (1B) that measures the tone of the
skin in the area that is to be treated at the beginning of each session and
occasionally during the session. The skin colour sensor (1B) ensures that
pulses are only emitted on suitable skin tones.
taNNED sKiN
Do Not use the appliance with energy levels from 2
to 5 on tanned skin or after recent exposure to the sun
and/or tanning beds. Do not expose the treated areas
to the sun. such use can cause serious burns, wounds,
blisters and changes in the colour of the skin (hyper or
hypo-pigmentation).
Tanned skin, especially after sun exposure, contains large amounts of
melanin.
This applies to all types of skin and complexions, including those that do not
seem to tan quickly. The presence of large amounts of melanin, expose the
skin to greater risk when light epilation methods are used.
if the appliance is going to be used at energy levels between 2
and 5, avoid exposure to the sun and/or tanning beds for 4 weeks
EN
41