9. If all coffee will not be served immediately, the coffee can be kept warm on
the warming plate. The coffee maker will automatically shut off after 2 hours
from when the ON/OFF button was pressed, if it hasn't been manually turned
off.
10. Use caution while pouring coffee out of pot, as contents will be very hot!
11. Always turn off the coffee maker and disconnect the power supply when not
in use.
Note: The coffee that is brewed will be less than the water added, as some of the
water is absorbed by the coffee grounds. After brewing, allow 2-3 minutes to cool
in between brews.
WARNING: Do not allow children to use the 12 Cup Programmable Coffee Maker
unless there is adult supervision. The coffee maker dispenses very hot water!
Caution: Never leave an empty coffee pot on a hot warming plate, otherwise the
pot is liable to crack.
Setting the clock and delay brew time
To set the clock:
1. Make sure the coffee maker is plugged in. The clock will flash on the display to
indicate that the time has not been set yet.
2. Continually press the HOUR and then the MINUTE buttons until you reach the
current time. The AM/PM indicator light will appear for PM and disappear for
AM.
Note: The time cycle is 12 hours. You must set the clock if you want to use the
delay brew feature.
To set delay brew time:
1. First follow steps 1 through 5 above (how to brew coffee).
2. Press PROGRAM one time, the ON/OFF indicator light will illuminate to GREEN
and will flash until you have set delay time.
3. Set the delayed start time by pressing HOUR and MINUTE buttons until you
reach delayed time desired. The AM/PM indicator light will appear for PM and
disappear for AM.
4. Next, press the DELAY BREW button, the ON/OFF indicator light will still be
GREEN but will stop flashing.
5. After a few seconds, the LED will display the current time.
10
User instructions