Danby DFF110A1WDB1 Guía De Utilización Y Cuidado Para El Propietario página 6

Installation Instructions
DOOR REVERSAL
INSTRUCTIONS
Your refrigerator is built with a reversible door. You have the choice of either opening it from the left or the right side.
In order to reverse the opening direction of your door, please follow these simple instructions:
Before you begin, unplug refrigerator or disconnect power.
Remove food and any adjustable door or utility bins from doors.
To avoid personal injury to yourself and/or property, we recom-
mend someone assist you during the door reversal process.
1) To access the lower hinge assembly, tilt back the refrigerator (Fig.
A).
2) Remove both leveling legs located at the front of the unit.
3) Remove the screws holding the lower hinge assembly to the unit.
4) Remove the main door assembly from the refrigerator
(lift open door slightly and pull downward).
5) Using a flat head screwdriver, remove the main door top
hinge pin (Fig. B).
6) Re-install the main door top hinge pin on the opposite side of the
unit.
7a) Remove the door plug and door bushing located on the top of the
main door.
7b) Interchange their positions (eg. door plug right side, door bushing
left side).
8) Re-install main door assembly on the refrigerator.
9) Remove door bushing (bottom door) and install on opposite side.
10) Re-install the lower hinge assembly on the opposite side.
11) Make sure the door assembly is properly aligned on the unit before
tightening lower hinge screws.
12) Re-install both leveling legs.
The process is now complete.
LIGHT BULB
REPLACEMENT
To replace the refrigerator light bulb:
1. Remove the screw from the light bulb cover.
2. Pull the light bulb cover downward.
3. Unscrew the bulb.
4. Replace with a standard 40 watt appliance bulb only.
IMPORTANT
CAUTION
4