Casselin CPAI350ET Manual De Instrucciones página 18

7. IRREGULARITY OF OPERATION
ERROR MESSAGE
E0
E1
E2
NOTE
The above-mentioned malfunctions are only cited as an indication and remain virtual. For any hesitation,
contact your dealer.
CAUSES
> No container on the hob, or the
container is unsuitable.
> The temperature of the container
rises excessively (eg due to the
blockage of the ventilation slit).
> Damaged part (eg.
a transistor).
> The device's overheating safety
device has tripped and the device has
switched off.
> Brief overvoltage.
EXPLANATION
> Place a suitable container on the
baking sheet.
> Release the ventilation slit.
Leave the device to cool for a few
minutes, then you can use it again.
If the error message appears again,
contact your seller.
> Contact your dealer.
> Remove the container from the
cooking. Wait a few
minutes, until the
container. After cooling,
the device is ready for
function.
> Disconnect the device from
the power supply (remove the
plug!).
Let the appliance cool down for a
few
minutes, before using it again.
EN