Brandson 303368 Manual De Usuario página 24

6.3 Timer function
The fan has 15 different timer levels that can be set up to a maximum duration of
7.5 hours in 30-minute steps. For this purpose, press the "Timer" button on the
remote control or the operating panel of the fan. The remaining time is indicated
by the LEDs on the timer display. To increase the duration of the timer, press the
button again.
Example: If you want to set a timer for 5.5 hours, press the "Timer" button till the
LEDs "4" "1" and "0.5" start glowing. Added together, these indicate the remain-
ing time of the timer.
6.4 Fan control
6.5 Height adjustment
To adjust the height of the fan, first loosen the height adjustment nut (12) slightly.
You can then adjust the height of the fan by holding the fan control (10) and
slightly pushing the fan upwards. Once the desired height is reached, tighten the
height adjustment nut (12) again.
24
Speed level display
Timer display
Mode display
Oscillation display
Operating controls
English