Tabla De Contenido; Compressor Requirements - Kobalt SGY-AIR223 Manual Del Usuario

TABLE OF CONTENTS
Compressor Requirements.............................................................................2
Product Specifications....................................................................................3
Safety Information..........................................................................................3
Package Contents..........................................................................................9
Preparation...................................................................................................10
Assembly Instructions...................................................................................10
Operating Instructions..................................................................................12
Removal of Sanding Pad..............................................................................13
Care and Maintenance.......................................
Troubleshooting............................................................................................14
Warranty.......................................................................................................15

COMPRESSOR REQUIREMENTS

4.5 90
@
SCFM PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas
IMPORTANT: To operate correctly, this tool requires airflow that is at least 4.5
Standard Cubic Feet per Minute (SCFM) at 90 pounds per square inch (PSI).
Check the specifications of your air compressor to be sure that it can support
both the minimum SCFM and PSI required. The air hose length could affect
how much air pressure the tool is actually receiving. You may need to adjust
the air pressure higher on the air regulator to achieve the working pressure
of 90 PSI.
..........................................13
2