Cleaning Method - Mediclinics E85 Manual De Instalación Y Utilizacion

PREVENTATIVE
Correct cleaning of the machine will lengthen its working life
considerably. When in use, the machine will accumulate dust inside
which should be cleaned out if used regularly, at least once a year.

CLEANING METHOD

1- Disconnect the dryer current supply.
2- Unscrew the lockscrews using the special wrench.
3- Remove cover.
4- With a soft bristle brush, remove the accumulated dust in the scroll
fan, rotating the same by hand.
5- With the same brush, clean accumulated dust in from the rest of the
components.
6- Clean the air inlet grill with a medium brush. Control of the motor
brushes condition. These should be replaced when its length is less
than 5mm (3/16").
7- Once the maintenance process is completed, re-mount the cover,
screw down the lockscrews and connect up.
8- Start up the machine and leave until no further dust remaining from
the cleaning process, comes out from the nozzle.
CLEANING OF CHROMED AND GOLD PLATED COVERS
For cleaning purposes only a wet cloth is to be used. Do not use
any kind of detergent, acids, lye, abrasives, hydrochloric acid, etc.
Take care not to damage or force any component.
-17-
www.mediclinics.com