Package Contents; Hardware Installation - Conceptronic CTVDIGUSB2 Manual De Usuario

The following items are present in the package of the Conceptronic USB Digital TV Receiver:
Conceptronic USB Digital TV Receiver (CTVDIGUSB2)

Magnetic DVB-T antenna

Remote control with battery (CR2025)

Product CD-ROM

Multilanguage quick installation guide

Warranty card & CE declaration booklet

Before installing the drivers and software, you need to connect the USB digital TV receiver to your
computer.
A. Turn on your computer.
B. Connect the DVB-T antenna to the antenna input of the USB digital TV receiver.
C. Connect the USB digital TV receiver to a free USB port on your computer.
Tip : If you want to extend the distance between the USB digital TV receiver and your computer, you
can use the included USB extension cable.
Your computer will recognize new hardware and show the hardware installation wizard. You can ignore
this hardware installation wizard and continue with the driver and software installation in chapter 4.

2. Package contents

3. Hardware installation

ENGLISH
13