Pre Operation; Operation; Starting; Operating Procedures - Skymsen DAL-06S Manual De Instrucciones

PICTURE 04
WATER ENTRANCE
WATER OUTFLOW JET
DISC

2.2 Pre Operation

Before to use the equipment all parts to be in contact with the product shall be washed
with water and neutral soap (see item 3.4 Cleaning).
Make sure the equipment is firm on its working place.

3. Operation

3.1 Starting

To start the equipment:
- Plug the equipment to the electric network.
- Press the ON/OFF Switch # 05 (Pic.01) to position "I"

3.2 Operating Procedures

IMPORTANT
Never place the hand on the Disc while it is on movement.
- Place the product inside the equipment.
- Close the Lid.
- The equipment does not start if the Lid # 01 (Pic.01) is not closed.
- Open the water flow.
- Start the equipment pressing the ON/OFF Switch to position "I".
- The Peeler has a maximum capacity of 10 Kg potatoes and the processing time is 1.5 to
2 minutes.
- Remove the product using the Product Exit Mouth # 11 (Pic.01) just lifting the Door # 03
(Pic.01) letting go completely out all the product.
8