Publicidad
Idiomas disponibles
Idiomas disponibles
1. Open the door that needs to be adjusted and
loosen the clamping nut ( A ) at the bottom of
the door by turning it clockwise (
the spanner included in the product package.
(Raise the lower of the two doors first.)
2. Adjust the height of the door by turning the
adjustment nut ( B ) counterclockwise (
with a spanner.
(Turn it counterclockwise (
the height of the door and clockwise (
decrease it.)
- Open the door and adjust it from the inside.
3. Once the doors are level, turn the clamping nut
( A ) counterclockwise (
Adjusting the level when the refrigerator
is empty can result in the refrigerator
becoming uneven again once items have
been placed inside.
If this occurs, adjust the level again.
DA68-02981J-07.indb 17
WHEN THE FREEZER DOOR IS
LOWER THAN FRIDGE DOOR
) using
A level refrigerator is necessary for getting the
doors perfectly even.
Make sure your refrigerator is level before you
begin.
If you need help leveling, review the previous
A
section on leveling the refrigerator.
)
) to increase
) to
The process for adjusting each door is the same.
Open the doors and adjust them, one at a time, as
B
follows:
1. Unscrew the nut ( 1 ) from the lower hinge until
it reaches the upper end of the bolt ( 2 ).
) to tighten it.
A
English - 17
Freezer door is lower than Fridge door
(3) Wrench
(2) Bolt
(1) Nut
When you release the nut ( 1 ), make sure
that you use the hex wrench provided
( 3 ) to loosen the bolt ( 2 ) in a counter-
clockwise (
) direction.
You should then be able to unscrew the
nut ( 1 ) with your fingers.
2018. 7. 4.
1:59
Publicidad
