Connections - Sveon SDigital TV Serie Manual De Usuario

SDT8000 - User Guide

6. Connections

Power connection
- Once video and audio connections are settled, please plug SDT8000 in power socket. The device will automati-
cally turn on.
Antenna In/Out connection
- Antenna connection to the device. To receive Digital TV signal you must connect the home antenna to the "RF
IN" connector located in the rear panel of the device. You need one antenna cable to make this connection.
- Device connection to the VCR. Connect one end of the antenna cable to the device antenna output ("RF OUT")
and the other end to the VCR. You need an extra antenna cable to make this connection.
Scart connection
1. Connect the device to your TV screen through Scart connection (cable not included).
2. Connect the device to the power socket, it will turn on automatically.
3. Select the Scart option in the TV input menu and wait while system loading process.
HDMI connection
1. Connect the device to your TV screen through HDMI connection.
2. Connect the device to the power socket, it will turn on automatically.
3. Select the HDMI option in the TV input menu and wait during system loading process.
Important: The HDMI connection includes audio and video signal through the same cable with a great quality; you
don´t need to do more connections to enjoy both signals.
Coaxial connection
If you want to enjoy surround sound 5.1 connect SDT8000 to an audio system that can decode 5.1 audio signal
with a coaxial cable (coaxial cable not included)
www.sveon.com
1
2
3
4
5
6
English
35