Channel Scan; Time - Sveon SDigital TV Serie Manual De Usuario

SDT8000 - User Guide

9.3 Channel scan

This section allows you to setup the following values:
- Auto channel scan: Select to start an auto channel scan
(all the channels).
- Manual channel scan: Select to start a channel scan in
the selected frequency range.
- Country: Select the country.
- Antenna signal: Enable this option if you need to enlarge
the antenna signal.
Note: The option "Manual channel scan" doesn´t scan automatically all the channels. The user must know the fre-
quency and the bandwidth of the channel he wants to find. When a frequency band is scanned, all the saved chan-
nels in this band are deleted to save the new found channels.

9.4 Time

This section allows you to adjust the Time parameters of
the device:
- Time: Select the way to update the time information bet-
ween Auto and Manual mode. When the option is ena-
bled, the Time information is updated using the TV signal
information.
- Turn Off: Set if you want to turn the on or off the device
automatically.
Note: There are some countries which use more than one
Time Zone. Spain uses GMT+1 (but in Canary Islands,
which uses GMT).
9.5 Option
Select this section to adjust language and subtitle values.
- OSD Language: Select the language you want to use
for OSD menu.
- Subtitles language: Select the default subtitles lan-
guage.
- Audio language: Select the default audio language.
- Digital output: Select "RAW" option to keep the original
format of audio signal and "PCM" to adjust the audio sig-
nal to the output connectors.
www.sveon.com
English
47