TRENDnet TEW-657BRM Guía De Instalación Rápida página 12

The Modem does not auto-detect my DSL connection. What should I do?
1. Verify that your DSL account is activated.
2. Make sure all the cables are properly connected (see Section 2).
3. In Section 3, select manual selection in the Setup Wizard and configure the Modem based
on information provided by your ISP.
All the settings are correct, but I cannot make a wireless connection to the Modem. What
should I do?
1. Double check that the Wireless LED on the Modem is lit.
2. Power cycle the Modem. Unplug the power to the Modem. Wait 15 seconds, then plug
the power back in.
Contact the manufacturer of your wireless network adapter. Make sure the
3.
wireless network adapter is configured with the proper SSID. The default SSID
of the TEW-657BRM is TRENDnet657. If you have enabled any encryption on
the Access Point, make sure to configure the wireless network adapter with the
same encryption key.
I forgot my login password. What should I do?
Take a pin or paperclip and press the reset button on the back of the Wireless Modem for 15
seconds. Then let go. This will return all settings to factory default. The default user name
and password is admin.
If you still encounter problems or have any questions regarding the TEW-657BRM, please contact
TRENDnet's Technical Support Department.
10