Before Operation; Setting The Clock; Microwave Power Level - Sharp R-642/R-742 Manual De Instrucciones

BEFORE OPERATION

Plug in the oven. The oven display will display: "0:00", an audible signal will sound once.
This model has a clock function and the oven uses less than 1.0 W in stand by mode. To set the clock, see below.

SETTING THE CLOCK

Your oven has a 24 hour clock mode.
1. Press the CLOCK SET key
2. Press the time keys and enter the current time. Enter the hours by pressing the 10 MIN key and enter the
minutes by pressing the 1 MIN and 10 S keys.
3. Press the CLOCK SET key
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not
been set, the display will only show "0:00" when cooking is complete.
• To check the time of day during a cooking process, press CLOCK SET key and the LED will display the time of
day for 2-3 seconds. This does not aff ect the cooking process.
• In the process of clock setting, if the STOP key is pressed or if there is no operation within 1 minute, the oven
will go back to the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00" after
the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased.

MICROWAVE POWER LEVEL

Power Level Press the MICROWAVE
HIGH
MEDIUM HIGH
MEDIUM
MEDIUM LOW
(DEFROST)
LOW
Generally the following recommendations apply:
100P/ 90P - (HIGH) used for fast cooking or reheating
e.g. for casseroles, hot beverages, vegetables etc.
80P/ 70P - (MEDIUM HIGH) used for longer cooking of dense
foods such as roast joints, meat loaf and plated meals, also for
sensitive dishes such as sponge cakes. At this reduced setting,
the food will cook evenly without over cooking at the sides.
60P/ 50P - (MEDIUM) for dense foods which require a
long cooking time when cooked conventionally, e.g.
once and "00:00" will fl ash.
to fi nish clock setting.
POWER LEVEL key
x1
x2
x3
x4
x5
x6
x7
x8
x9
x10
x11
• Your oven has 11 power levels, as shown.
Display
• To change the power level for cooking, press
(Percentage)
the MICROWAVE POWER LEVEL key until the
display indicates the desired level. Press the
START key to start the oven.
100P • To check the power level during cooking,
press the MICROWAVE POWER LEVEL key.
90P
As long as your fi nger is pressing the MICRO-
80P
WAVE POWER LEVEL key the power level will
be displayed. The oven continues to count
70P
down although the display will show the
60P
power level.
50P
• If "0P" is selected, the oven will work with fan
for no power. You can use this level to remove
40P
the odour.
30P
20P
10P
0P
beef casserole, it is advisable to use this power setting
to ensure the meat will be tender.
40P/ 30P - (MEDIUM LOW) to defrost, select this power
setting, to ensure that the dish defrosts evenly. This
setting is also ideal for simmering rice, pasta, dump-
lings and cooking egg custard.
20P/ 10P - (LOW) For gentle defrosting, e.g. cream ga-
teaux or pastry.
GB-8