Temperature Setting; Daily Use - Brandt BFD4522SW Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USE & TIPS
"COLD AREA" indicator
The sign opposite can be found in your fridge.
It clearly shows the coldest zone of your appliance, where the temperature is lower than
or equal to +4°C.
A temperature gauge in this zone allows you to check the settings of your fridge.
Adjust the thermostat
Temperature correct
ok
Warning!
If the door of the fridge is left open for too long, the temperature inside the fridge will rise. Check the
temperature gauge within 30 seconds after opening the door to make sure that the reading is correct.

Temperature setting

 Plug on your appliance. The internal temperature is controlled by a
thermostat. There are 8 settings. 1 is warmest setting and 7 is
coldest when set is 0, the appliance is switched off. When set is max,
compressor will not stop
 The appliance may not operate at the correct temperature if it is in a
particularly hot or if you open the door often.

Daily use

Your refrigerator compartment is equipped with shelves, door racks and drawers with various
logos to help you store your food in the right place.
Using the shelves
The walls of the refrigerator are equipped with a series of runners so that the
shelves can be positioned as desired.
Positioning the small door trays
The small door trays can be removed to assist cleaning. To do this,
progressively pull the door rack in the direction indicated by the arrows until you
can remove it completely. After cleaning it, replace it in the desired location.
Hints and Tips
 The refrigerator is a domestic appliance suited to short-term conservation of food products like
fruit, vegetables, drinks, etc.
 Do not use it as a specialised appliance for storing products that require storage in line with strict
temperature rules, like medicines, etc.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bfd4522sxBfd4522ss

Tabla de contenido