Brandt BFD6521SW Manual De Instrucciones página 34

7. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
8. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet.
Transfer the lower door to the property position.
9. Make the middle hinge reverse the direction 1 80"C, then transfer it to the left
property position. Make the middle hinge pin in the upper hole of the lower
door, then tight the bolts.
10. Place the upper door back on. Ensure the door is aligned horizontally and
vertically so that the seal are closed on all sides before finally tightening the top
hinge. Then inert the hinge and screw it to the top of the unit.
11. Put the top cover and then screw back.
12. Detach the Fridge and the Freezer door gaskets and then attach them after
rotating.
unscrew
Screw