Homak security HS30103605 Guía De Utilización Y Directivas De Funcionamiento página 3

2. Foam Component
The foam part is shown below. The part has been designed to fi t into the
bottom of the cabinet. Carefully, remove the paper backing revealing the
adhesive backing and place neatly into the bottom of the cabinet. Once
the backing has been removed and the foam is attached, it can not be
removed without damage.
Decide the height that you will place the barrel rest. From this measure-
ment cut the back wall foam into two pieces at the height that you will
place the barrel rest. Any extra that is left may be placed above the barrel
rest on the back wall.
B
Foam
C
Components
BARREL REST
MOUNTING BAR
Back Wall
Foam
Bottom
- 3 -