CARLO GAVAZZI EM330 Instrucciones De Instalacion Y Uso página 11

Fig. 18
Setting a parameter (Fig. 18)
Procedure example: how to set P int=24.
NOTE: the first displayed value is the current one. Settings are applied when the value is confirmed.The value is
being edited if Prg appears, the set value is out of range if Err appears. After 120 s of disuse on a value being set,
the title page is displayed (P int in the figure) and Prg disappears. After another 120 s, the measurement page
set in HoME returns.
8021422 | EM330
s 1,5
x3
s 1,5
x2
s 1,5
OK NO OK
s 2
©2014 | CARLO GAVAZZI Controls SpA| 11