ASROCK 775XFire-eSATA2+ Manual Del Usuario página 24

ATX Power Connector
(20-pin ATXPWR1)
(see p.2 No. 33)
ATX 12V Connector
(4-pin ATX12V1)
(see p.2 No. 2)
SLI/XFIRE Power Connector
(4-pin SLI/XFIRE_POWER1)
(see p.2 No. 3)
Game Port Header
(15-pin GAME1)
(see p.2 No. 26)
HDMI_SPDIF Header
(3-pin HDMI_SPDIF1)
(see p.2 No. 29)
HDMI_SPDIF Cable
(Optional)
A. black end
2 4 2 4 2 4
2 4 2 4
ASRock 775XFire-eSATA2+ Motherboard
Please connect an ATX power
supply to this connector.
Please connect an ATX 12V
power supply to this connector.
It is not necessary to use this
connector, but please connect it
with a hard disk power connecor
when two graphics cards are
SLI/XFIRE_POWER1
plugged to this motherboard at
the same time.
Connect a Game cable to this
header if the Game port bracket
is installed.
HDMI_SPDIF header, providing
SPDIF audio output to HDMI VGA
card, allows the system to
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI connector of
HDMI VGA card to this header.
Please connect the black end (A)
C
of HDMI_SPDIF cable to the
B
HDMI_SPDIF header on the
A
motherboard. Then connect the
white end (B or C) of
HDMI_SPDIF cable to the
HDMI_SPDIF connector of HDMI
VGA card.
B. white end (2-pin) C. white end (3-pin)