ASROCK 775XFire-eSATA2+ Manual Del Usuario página 36

Idiomas disponibles

If you set "Configure SATA as" to [AHCI] mode, and plan to install Windows

XP / XP 64-bit OS on a SATA hard disk, you have to make a SATA driver diskette.

Please refer to step 2 on page 33 for details. (If you select AHCI mode and plan to

install Windows

Vista

driver diskette.) But if you choose [IDE] mode, please ignore this step.

STEP 3: Install Windows

your system.

After making a SATA driver diskette, you can start to install Windows

XP / XP 64-bit on your system. At the beginning of Windows

install a third-party SCSI or RAID driver. When prompted, insert a floppy disk

containing the Intel RAID driver. After reading the floppy disk, the driver will be

presented. Select the driver to install according to the mode you choose and the

OS you install. You may select: "Intel(R) 82801GR/GH SATA AHCI Controller

(Desktop ICH7R-Windows XP/2000)" for Windows

82801GR/GH SATA AHCI Controller (Desktop ICH7R-Windows XP64)" for Windows

XP 64-bit.

2.17

2.17 Untied Overclocking T

2.17

Untied Overclocking T

Untied Overclocking Technology

Untied Overclocking T

2.17

Untied Overclocking T

This motherboard supports Untied Overclocking Technology, which means during

overclocking, FSB enjoys better margin due to fixed PCI bus. You may set "CPU Host

Frequency" option of BIOS setup to [Auto], which will show you the actual CPU host

frequency in the following item. Therefore, CPU FSB is untied during overclocking,

but PCI bus is in the fixed mode so that FSB can operate under a more stable

overclocking environment.

3 6

ASRock 775XFire-eSATA2+ Motherboard

on a SATA hard disk, you don't need to make a SATA

2000 / Windows

XP / Windows

echnology

2000 /

XP 64-bit OS on

2000 /

setup, press F6 to

XP/2000 or "Intel(R)