GE AGH06 Manual Del Propietário página 12

INSTALL THE SIDE ACCORDION
4
PANELS
Slide the left and right accordion panels
A
into the top and bottom mounting rails.
Attach the accordion panels to the case
B
using 4 Type B screws on each side.
Accordion
panel
Type B
screws
Installation Instructions
Top mounting rail
BACK
Bottom mounting rail
INSTALL THE AIR CONDITIONER
5
IN THE WINDOW
Center the air conditioner in the window
A
with the bottom mounting rail between
the window stool and the support brackets.
Top
mounting
rail
Bottom
mounting
rail
Close the window. Make sure the window
B
sash is behind the top mounting rail of
the air conditioner. It should be level or
slightly tilted to the outside. Use a level;
about 1/3 bubble will be the correct case
slant to the outside.
Type A
screws
Extend the accordion panels to fill the
C
window opening and use 4 Type A screws
to secure them, 2 on each side.
12
Window
1/3 bubble
Support brackets
OUTSIDE
Type A
screws