Before Using For The First Time; Soft Start; Operating Instructions - CHEF-BUILT CCB-2000 Manual De Instrucciones

BEFORE USING FOR THE FIRST TIME

1. Carefully unpack the Power Blender and remove all packaging materials
2. Following the detailed procedures described in CARE & CLEANING
INSTRUCTIONS, wash, rinse, sanitize and dry blender parts before assembly.
3. Clean and sanitize the motor base.
WARNING: NEVER IMMERSE THE MOTOR BASE OR CORD IN WATER.

SOFT START

1. This Chef-Built Power Blender features a 1 second "soft start."
2. Blending will gradually increase until desired speed setting is reached.

OPERATING INSTRUCTIONS

1. The 48 oz. Chef-Built Commercial Power Blender Tritan
fixed stainless-steel blades that require no assembly.
2. Place the motor base on a flat, clean, dry counter top or table, away from
flammable materials.
3. Make sure the unit is unplugged. Check to make sure the ON/OFF (I/O) switch on
the side of the motor base is in the OFF (O) position.
4. Place the jar on the motor base so that the jar coupler and motor coupler are
aligned and engaged.
IMPORTANT: Make sure the jar is properly fitted onto the motor base before
adding food for blending.
5. Add food to be processed to the jar.
WARNING: When blending, foods or liquids tend to expand and rise up the side
of the jar. To avoid personal injury, leakage or damage to the Power Blender,
DO NOT FILL JAR WITH FOOD PAST THE MAX FILL LINE.
6. Place the lid on top of the jar and press firmly to seal. To avoid spills, make sure
the lid is secure and the lid cap is in place before operation.
7. Plug the power cord into a 120V AC 3-prong electrical outlet.
8. Press the ON/OFF (I/O) switch to ON (I). The white LEDs for timer and all 4 key
indicators light up for a second
9. Press the HIGH or LOW button to begin operation. The corresponding indicator
light will illuminate and the blending TIME, will begin to count up to 99 seconds
There will be a 5 second pause. If STOP is not pressed, the Bar Blender will reset
to 00 and continue processing.
IMPORTANT: Always hold jar with one hand when starting and while blending
10. CAUTION: Pay close attention while processing. Never operate the Bar
Blender when the jar is empty, except when SANITIZING. (See SANITIZE & DRY
CONTAINER section.)
11. Press the STOP button AT ANY TIME to cease operation.
12. TO CRUSH ICE: Blend continuously on HIGH. Check contents. If necessary,
add liquid and continue to process until all cubes are reduced to the desired
consistency.
IMPORTANT: Always hold jar with one hand when starting and while crushing ice.
13. PULSE: Press PULSE for short bursts of power. PULSE is activated as long as
the button is pressed. PULSE action will cease as the button is released. Time
the PULSES so that blades come to a complete stop before pressing the PULSE
button again.
SO-315234_18062 Chef-Built_Bar Blender 48oz CCB-2000_Sensio_IM_R6.indd 5
Jar is equipped with
®
5
2018-08-10 3:36 PM