General Guidelines - Songmics OBG73 Manual Del Usuario

General Guidelines

Please read the following instruction carefully and use the product accordingly.
Ÿ
Please keep this manual and hand it over when you transfer the product.
Ÿ
This summary may not include every detail of all variations and considered steps. Please contact us when
Ÿ
further information and help are needed.
Notes
Please check if the components are intact before the assembly and strictly adhere to the instruction. Incorrect
Ÿ
assembly or damaged component will have risk of injury.
Never use the product if any component is missing or defective.
Ÿ
When assemble the armest, correctly postion the screws into the holes and then gradually tighten them.
Ÿ
The product is intended for indoor use by one person.
Ÿ
The maximum static load capacity is 150 kg (330 lbs), the armrests can support up to 68 kg (150 lbs).
Ÿ
Do not overload the armrests to avoid damage.
Ÿ
Note: Please place the office chair on level grounds and keep the base in full contact with the ground. Do not
Ÿ
sit only on the edge of the chair. When standing up, please hold the armrests firmly. Dangerous actions such
as playing or stooping on the seat may lead to unbalance.
The wheels of this office chair are suitable for nearly all kinds of floors, please use a protective mat for laminate
Ÿ
and parquet floors.
Only professional technicians can disassemble or replace the auto-return cylinder.
Ÿ
Never stand on the chair or use it as a ladder or climbing tool.
Ÿ
Avoid direct exposure to strong sunlight. Keep the product away from sharp objects.
Ÿ
Please check the firmness of connections regularly. If necessary, tighten the screws.
Ÿ
Please note that each type of screws has a spare screw.
Ÿ
To perform routine maintenance, please check the position when the squeak occurs, and try to apply lubricant
Ÿ
between the metal parts to alleviate the issue.
Warnings
Please use the chair properly. Incorrect use, such as using it as climbing tool or sitting on the armrest is not
Ÿ
allowed. Children must be under adult supervision to use the product.
Unauthorized change and modification may affect the safety.
Ÿ
During the assembly process, keep small parts out of the reach of children. It may be fatal if swallowed or
Ÿ
inhaled.
To avoid potential danger of suffocation, keep all parts and packaging (films, plastic bags and foam, etc.) away
Ÿ
from babies and children.
EN
2