Speedlink DRIFT O.Z. Guía De Usuario página 4

1. Place the racing wheel on a smooth, level surface and connect it
to your computer's USB port using the USB cable.
2. Plug the pedal kit into the socket on the back of
3. To install the driver software, insert the supplied driver CD
into your CD drive. If the installation process does not start
automatically, navigate to your CD drive using Windows* Explorer
and start the program by clicking Setup.exe.
Always use the latest driver for the best possible performance. You
can find it on our website at www.speedlink.com.
4. Keep the Mode button held depressed for three seconds to
switch between the racing wheel's two operating modes: XInput
(for the majority of current games) and DirectInput (for all older
and some newer games). If the red LED (left) glows, DirectInput
mode is active; if the green LED (right) glows, the device is in
Set the racing wheel to the desired mode before starting a game.
Switching during gameplay may stop the game identifying the
controller correctly; if this happens, restart the game. Please
consult the manual that accompanied the game, ask the publisher
or try both modes to establish which mode works the best.
5. In the driver menu, which you can access via the Control Panel,
you can test the racing wheel and button functions, and – in
DirectInput mode – make precise configuration changes such as
adjust the sensitivity setting or vibration strength.
FOR ADDITIONAL USER GUIDE LANGUAGES,
the racing wheel using the cable.
Xinput mode.
PLEASE VISIT www.speedlink.com
EN