Using The Camera - Steren CCTV-220 Manual De Instrucciones

USING THE CAMERA

You can access and manage the Wireless Internet Camera
through:
This chapter describes the Web Confi guration Utility, and
provides the instructions on using the camera with a web
browser.
WEB CONFIGURATION UTILITY
The Wireless Internet Camera must be confi gured through its
built-in Web-based Confi guration. (Extensive knowledge of LAN
will be helpful in setting up the Wireless Internet Camera.)
From the web browser, enter the default IP address to access
the Welcome screen of the Wireless Internet Camera. To
confi gure your Wireless Internet Camera, type
http://192.168.0.20 in the address box. The number is the default
IP address of your Wireless Internet Camera. Then, press
[Enter].
The computer's IP address must correspond with the The computer's IP address must correspond with the
camera's IP address in the same segment for the two camera's IP address in the same segment for the two
devices to communicate. devices to communicate.
1) a web browser,
2) the enclosed software IPView SE.
ENGLISH-13