Steren CCTV-220 Manual De Instrucciones página 22

connect to ANY access point under the
infrastructure network mode. To connect the
camera to a specifi c access point on the
network, please make sure to set the SSID of
the camera to correspond with the access
point's SSID for communication. Type any string
up to 32 characters long (spaces, symbols, and
punctuation are not allowed) in the Network
Name box.
To connect the camera to an Ad-Hoc wireless
workgroup, make sure to set the same wireless
channel and SSID to match with the
PC/Notebook's confi guration for direct wireless
communication.
• Wireless Channel: This pull-down menu
provides the wireless channel for
communication. A "channel" is a range of
frequencies to be used in communication
between the camera and access point in
Infrastructure mode, or the camera and
PC/Notebook in Ad-Hoc mode. Select the
appropriate channel from the list provided
depending on the regulatory region where the
unit is sold. The default setting is at channel 11.
• Transmission Rate: Select the data transmit
rate from this pull-down menu. The default
setting is Fully Automatic.
- WEP Encryption
• WEP Encryption: Wireless network
communications can be intercepted easily. WEP
(Wired Equivalent Privacy) is an encryption
method specifi ed by the IEEE 802.11g standard
to make any intercepted communications
extremely diffi cult to interpret by unauthorized
parties. The default setting for this option is
Disable.
ENGLISH-22