Hinkley ARTISTE Manual De Instrucciones página 20

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION OF SAFETY
CABLE SUPPORT
Attach the wood screw and the flat washer to the ceiling joist as
shown (do not fully tighten). Slide the cable clamp onto the
safety cable from the fan. Loop the safety cable around the
wood screw that was just attached to ceiling joist. Feed the end
of the cable into the clamp and pull as much cable through as
safety cable clamp
possible. Firmly tighten screw in the clamp. Cut o excess
cable.

Publicidad

Tabla de contenido
loading

Tabla de contenido