BONAIRE Durango 5300 Manual Del Usuario página 7

5. Electrical Connection and Installation
Review and understand the warnings in the General Safety Information section, page 3
& 4.
Leg Installation: Insert legs on both sides at the bottom.
1.
Attention: Ensure the castor wheels with brakes are at the front.
Castor wheels with
brakes MUST be at front
of unit
2. Install the cooler on a flat, level surface.
3. Adjustable Up and Down louvre: The Up and
Down Louvres can be adjusted using the
protruded tab shown on Page 5.
4. Add clean water into the water tank. Check the
water level window on the front of the cooler to
see when the water tank is full.
5. Plug the unit into a 120 VAC (± 10%) 60 Hz, 1
phase GFCI protected grounded outlet.
Unit Front
Screws
7
Fit using 6 supplied screws.
Water Level